Snow Plows

Snowplows

Take control of winter’s worst with Hi-Way’s ruggedly engineered snowplows. Find blades for the smallest work trucks and the biggest behemoths, each robustly constructed for maximum removal at the height of efficiency.

What types of Hi-Way snowplows are available?

Hi-Way snowplow models include:

  • Steel full-trip
  • Poly trip edge
  • Super plow
  • Patrol wing
  • Shelving wing
  • Underbody
  • One way

What size trucks will Hi-Way snowplows fit?

Hi-Way manufactures snowplows for trucks from smaller medium-duty trucks (typically between 16,500 to 26,000 GVWR) up to the heaviest-duty trucks on the road today.

Steel Trip Edge

Triggers upon contact with a hidden obstacle, then quickly resets to continue moving snow to minimize load loss during a thick, wet snowstorm

  • 3/16 inch (0.47 cm) thick poly moldboard
  • 8 to 9.6 ft. (2.44 to 2.93 m) cutting width
  • 10 to 11 ft. (3.05 to 3.35 m) length

Poly Trip Edge

Backed with eight reinforcing steel ribs to avoid corrosion zones and extend life, plus features convenient hydraulic reverse for right- or left-hand discharge

  • 3/8 inch (0.953 cm) thick poly moldboard
  • 8 to 9.6 ft. (2.44 to 2.93 m) cutting width
  • 10 to 12 ft. (3.05 to 3.66 m) length

One Way

Solid welded ribs for added strength plus a one-piece trip edge and adjustable ¾ inch (0.635 cm) square wire horizontal torsion springs for powerful discharge

  • 10 gauge poly moldboard
  • 9 ft. (2.74 m) cutting width
  • 8 ft. (3.9 m) length

Super Plow

Packed with power for medium-duty trucks 16,500 to 26,000 GVWR, with a heavy-duty framework to minimize rust zones and extend service life

  • 3/8 inch (0.953 cm) thick poly moldboard
  • 3 to 8.9 ft. (2.22 to 2.71 m) cutting width
  • 9 to 11 ft. (2.74 to 3.35 m) length

Under Body

Powerful steel construction for total snow and ice removal, plus minimum 8 inch (20.3 cm) at-rest ground clearance depending on truck frame

  • 1 inch (2.54 cm) thick steel
  • 0°, 15°, 35° and 45° models
  • 1 to 12 ft. (2.16 to 3.66 m) cutting width

Steel Full Trip

Excellent snow and ice casting results thanks to a heavy-duty dual compression spring trip that easily adjusts with three predetermined positions

  • 3/16 inch (0.476 cm) thick poly moldboard
  • 8 to 10.5 ft. (2.68 to 3.20 m) cutting width at 30°
  • 10 to 12 ft. (3.05 to 3.66 m) length

Patrol Wing

Easy to operate and a powerful addition to a one way or reversible snowplow to increase the cutting swath width

  • 3/16 inch (0.476 cm) thick poly moldboard
  • 8 to 9 ft. (2.44 to 2.74 m) cutting edge length
  • 9 to 10 ft. (2.74 to 3.05 m) length

Shelving Wing

Cuts a wider swath and increases benching capabilities on one way or reversible plows

  • 10 gauge poly moldboard
  • 9 to 11 ft. (2.74 to 3.35 m) cutting width
  • 10 to 12 ft. (3.05 to 3.66 m)

Precision Manufacturing

The best results only come with the most precisely manufactured equipment, built using advanced product techniques like laser cutting and slot-and-tab design. Precision on the back end translates to precision on the front lines.